DRAMINSKI Twist Grain pro Mode D'emploi page 42

5 2 c) LCD contrast – in order to change the LCD con-
trast, enter the Main menu / Settings/ Display /
LCD contrast, then choose an appropriate value
with the help of
for example
TG pro 21.01.2018 TG pro
Display
Backlight intensity
Backlight o time
LCD contrast
5 3 Power auto off
Regulation of time after which the device turns off auto-
matically counts down from the moment when the key-
board was touched for the last time In order to change
the power auto off, enter the Main menu / Settings /
Power auto off, then choose an appropriate value with
the help of or and confirm with
or and confirm with
21.01.2018
LCD contrast
10 30
12
, for example:
TG pro 21.01.2018
Settings
Language
Display
Power auto o
Number of averages
,
5 4 Number of averages
The device automatically calculates the average of the
last measurements In order to set the number of meas-
urements from which the average is calculated, enter
the Main menu / Settings / Number of averages, then
choose an appropriate number with the help of
and confirm with
TG pro 21.01.2018
Settings
Language
Display
Power auto o
Number of averages
The average results appears on the left side of the display
(above the temperature value) after three measurements
have been performed if the number of averages is set to
"3", for example:
TG pro 21.01.2018
Power auto o
1 30
3 min
, for example:
TG pro 21.01.2018
Number of averages
2 20
3
CHAPTER 11 | MAIN MENU
EN
or
41