Before Use; Safety Instructions - SYNQ SMD.5 Mode D'emploi

ENGLISH
OPERATION MANUAL
Congratulations and thank you for buying this SYNQ product. Please read these operating instructions
carefully so you will know how to operate this product properly. After you have finished reading the
instructions, put them in a safe place for future reference.
FEATURES
This unit is radio-interference suppressed. This appliance meets the requirements of the current European
and national guidelines. Conformity has been established and the relevant statements and documents have
been deposited by the manufacturer.
 A compact and robust 19"-mixer for the all-round DJs and hiring companies that don't need all those hi-
tech effects but focus on reliability and perfect sound quality!
 5 input channels equipped with smooth dual-rail 60mm DJ-faders:
 2 channels with switchable USB(line)/line inputs, gain, 3-band EQ (+12/-26dB), PFL and input level
meters
 3 channels with switchable phono(line)/line inputs, gain, 3-band EQ (+12/-26dB), PFL and input level
meters
 2 extra DJ microphone inputs with gain, 3-band EQ and On-Air switch
 DJ microphones can be individually assigned to automatic talkover with adjustable damping
 2 USB-soundcards on channels 1+5, 1 can also be used for direct recording of your mix on PC.
 Assignable, detachable, smooth 45mm dual-rail VCA crossfader with adjustable curve and on/off switch
 Master1 section with balance control, stereo level meter and stereo/mono switch
 Additional master2 (booth) output
 PFL section with split/blend option and PFL/main mix control
 Powerful headphones output with both 6.3mm and 3.5mm stereo jacks
 Balanced subwoofer XLR-output with active crossover and adjustable crossover frequency/level
 Master1 has both balanced XLR and unbalanced RCA/cinch outputs
 Master2 and record output, both using unbalanced RCA/cinch connectors
 Special cabinet design with recessed connector plane for space-saving rack mounting.

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
 To protect the environment, please try to recycle the packing material as much as possible.
Check the contents:
Check that the carton contains the following items:
 User manual
 SMD-5 mixer
 Mains cable
 USB cable
SYNQ
®
OPERATION MANUAL
1/36
ENGLISH

SAFETY INSTRUCTIONS:

 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be
placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit,
immediately disconnect the mains power.
 No naked flame sources, such as lighted candles, should be placed on the appliance.
 Don't cover any ventilation openings as this may result in overheating.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Minimum distances around the apparatus for sufficient ventilation is 5cm.
 Always unplug the unit when it is not used for a longer time or before you start servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The socket inlet shall remain operable for disconnection from the mains.
 The power cord should always be in perfect condition. Switch the unit immediately off when the power cord
is squashed or damaged.
 Never let the power-cord come into contact with other cables!
 When the power switch is in OFF position, this unit is not completely disconnected from the mains!
 This appliance must be earthed to in order comply with safety regulations.
 In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
 In the event of serious operating problems, stop using the appliance and contact your dealer immediately.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
INSTALLATION GUIDELINES:
 Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity.
 Placing and using the unit for long periods near heat-generating sources such as amplifiers, spotlights, etc.
will affect its performance and may even damage the unit.
 The unit can be mounted in 19-inch racks. Attach the unit using the 4 screw holes on the front panel. Be
sure to use screws of the appropriate size. (screws not provided) Take care to minimize shocks and
vibrations during transport.
SMD-5 SYNQ
®
CAUTION: To reduce the risk of electric shock, do not
CAUTION
remove the top cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol means: Safety Class I appliance
2/36
OPERATION MANUAL
SMD-5