Function
• Optional operation with DC power (max. ± 18 volts DC),
AC power (with Märklin 32 VA transformer), with Märklin Delta
(only with the 6607 Delta Station), Märklin Digital (Control Unit,
Central Station), or Märklin Systems (Mobile Station,
Central Station).
• The mode of operation is automatically recognized.
• Mfx technology for the Mobile Station / Central Station.
Address that set at the factory: 68
Name set at the factory: Ce 6/8 II
• Adjustable acceleration/Braking delay (ABV).
• Adjustable maximum speed.
• Volume can be changed for the sound effects.
• The model is designed for operation on Märklin 1 Gauge track. As
the consumer you assume the risk for operating on other makes of
track.
• Minimum radius for operation: 1020 mm / 40-3/16".
• Märklin claw couplers front and rear. You may have operations
problems if you use other makes of couplers.
Maintenance procedures that become necessary with normal
operation of the locomotive are described below. Please see your
authorized Märklin dealer for repairs or spare parts.
Betrieb • Operation
No warranty or damage claims shall be accepted in those cases where parts
neither manufactured nor approved by Märklin have been installed in Märklin
products or where Märklin products have been converted in such a way that
the non-Märklin parts or the conversion were causal to the defects and / or
damage arising. The burden of presenting evidence and the burden of proof
thereof, that the installation of non-Märklin parts or the conversion in or of
Märklin products was not causal to the defects and / or damage arising, is
borne by the person and / or company responsible for the installation and / or
conversion, or by the customer.
Safety Warnings
• This locomotive is to be used only with an operating system desig-
ned for it (Märklin 6646/6647 AC transformer, Märklin Delta,
Märklin Digital or Märklin Systems).
• Pay close attention to the safety warnings in the instructions for
your operating system.
• The feeder track must be equipped to prevent interference with
radio and television reception, when the powered rail car is to be
run in conventional operation. The 104770 interference suppression
set is to be used for this purpose.The interference suppression set
is not suitable for digital operation.
• Caution: Regardless of whether model is standing still or in motion,
never grasp the drive rods and valve gear with your fingers. You
may possibly pinch and injure your fingers!
• WARNING! This product contains magnets. Swallowing more than
one magnet may cause death in certain circumstances. If necessa-
ry, see a doctor immediately.
12
Fonctionnement • Exploitatie