Silverline 454954 Traduction Des Instructions Originales page 10

GB
Troubleshooting
Problem
No function when On/Off Slider Switch
(4) is operated
Stopped working after some opera-
tion time
Poor cutting
Vibration or abnormal noise
10
Possible cause
No power
Defective On/Off Slider Switch
Tool is overheating
Blade teeth worn
Blade damaged
Incorrectly fitted blade
Loose blade
Blade vibrating
Other part of tool has worked loose
Accessory incorrectly fitted or loose
Solution
Check mains connection
Replace the On/Off Slider Switch at an authorised Silverline service centre
Switch off the tool and let it cool down to room temperature. Inspect and clean the
motor vents
Replace blade
Replace blade
Refit blade
Tighten Blade Securing Bolt (10)
Retighten Blade Securing Bolt (10)
Retighten
Correctly fit accessory