Cleaning Instructions - Weston JERKY GUN JR. Mode D'emploi

CLEANING INSTRUCTIONS

Clean all parts thoroughly before and after use.
1. Remove the Front Ring Nut any Jerky/Snack Stick Attachments and the Jerky
Tube from the Handle Assembly.
2. NOTE: The Handle Assembly is NOT dishwasher safe. Keep the Handle
Assembly out of water.
Hand-wash the plastic Jerky Tube, Plunger Shaft, Jerky Drying Racks and all
parts that come into contact with food with warm, soapy water and the Cleaning
Brush Set.
Using warm, soapy water, and the Cleaning Brush Set, thoroughly clean inside
Jerky Tube and Jerky/Snack Stick Attachments. Thoroughly wash all parts of the
Jerky Gun that come in contact with food.
3. Dry all parts thoroughly before storing. Reassemble the Jerky Gun and store
for the next use.
6