Victron energy BPP2 Manuel page 33

Auto shore curr.
†Shore cur. range
Cache values?
Save settings A
Load settings A
Save settings B
Load settings B
Device address
Alarms menu
Low battery
High temperature
Overload
Connection lost
Setting If this setting is enabled, when the shore
current is connected, the shore current limit
will be displayed automatically.
Setting The maximum current that the system is
capable of drawing.
Setting Enable or disable value caching.
Setting Save a copy of the current settings in the VVC.
Setting Load the settings saved with "Save settings A"
into the current device (this must have the
same software version as the device from
which these values were copied).
Setting Save a copy of the current settings in the VVC.
These settings are independent of those
saved with "Save settings A".
Setting Load the settings saved with "Save settings B"
into the current device (this must have the
same software version as the device from
which these values were copied).
Information The device address for the VVC.
Setting Disable this option to prevent the VVC from
generating an alarm when the battery is low.
Setting Disable this option to prevent the VVC from
generating an alarm when the temperature is
high.
Setting Disable this option to prevent the VVC from
generating an alarm in the event of an
overload.
Setting Disable this option to prevent the VVC from
generating an alarm when the connection to
the target device is lost.
27