Supported Devices - Victron energy BPP2 Manuel

6 Connecting to a VE.Bus system
With its integrated VVC, the BPP provides the powerful co
VE Configure software, without the need for a computer. U
VVC, you can view the current status of your VE.Bus syste
adjust settings and system configuration.

6.1 Supported devices

The VVC works with all VE.Bus devices with software vers
and higher. This includes the following products:
Multi
•
Multi Plus
•
Multi Compact
•
Inverter
•
Inverter Compact
•
Quattro
•
6.2 Using the VVC
Note: Refer to chapter 0 for the correct wiring and jumper
The VVC will now be shown in the device list. If
you have other VE.Net devices connected, you
may have to scroll through the list first before the
VVC is visible.
The first line of the VVC's device list entry will display the t
you have connected, and the second will show the current
connected device.
Press the right directional button to view the VVC menu. Y
able to scroll through a list of information and settings rela
device that you have connected.
Switch on the BPP.
If this is the first time you have conn
device to the BPP, you may be prom
the panel. You should do this now.
control of the
. Using the
stem, as well as
sion 19xx111
r configuration.
nnected this
ompted to restart
e type of device
nt state of the
You will now be
lating to the
19