Victron energy BPP2 Manuel page 18

4.3.1 The system overview
The system overview is designed to work with the VE.Net to
converter (VVC) connected to a Phoenix Multi or Quattro, a
a VE.Net Battery Controller (VBC) and VE.Net Generator M
A
B
C
The different information that can be displayed on the syste
described below. The actual information that will be displaye
on which devices are configured, as well as the current syst
Item
A The AC input to the Multi or Quattro.
B The AC output of the generator.
C The battery voltage and time to go.
D The AC output of the Multi or Quattro.
The DC current transferred between the battery an
E
or Quattro.
F The current used by the DC system.
Indicates the state of the Phoenix Multi or Quattro
5.2 more information).
When this icon contains an upwards pointing arrow
that the battery is charging. When discharging, the
indicate the state of charge.
12
Description
t to VE.Bus
and optionally
Module (VGM).
D
E
F
tem overview is
yed depends
stem state.
and the Multi
o (see chapter
ow, it means
e icon will