Marmitek M229 Notice D'utilisation page 14

ENGLISH
EX-229C DOME CAMERA PARTS INDICATION
1. Microphone
2. Connection wires
3. CCD camera
4. Microphone Sensitivity Adjustment
5. Mounting Screws
EX-229C DOME CAMERA INSTALLATION
If the camera is mounted in a small enclosed space, adjust the microphone sensitivity to a lower
setting.
The camera is connected by a 2 wire cable to the
EX-229C DOME CAMERA SYSTEM SETUP
• Press and hold the left button of the
Base Unit (7) for at least 2 seconds to
enter the Setup mode. The Menu
appears on the screen.
14
Base Unit. Additional Dome Camera's can be
connected to the terminals DR4/CAM3 or
DR3/CAM2 or DR2/CAM1. There is no polarity.
• Step through the menu
by pressing the left (7)
and right (9) button of
the Base Unit. Select
the camera
corresponding with the
Terminal number the
camera is connected to. Activate the camera by
pressing the middle button (8).
Pick up the Handset and replace it to exit the Setup
mode.
© MARMITEK