Marmitek M229 Notice D'utilisation page 10

ENGLISH
3. Watching new pictures added to the memory
• If the Memory Status LED (11) is flashing slowly, a new picture (max. 32) has been captured.
• Press and hold the middle button (8) for at least 2 seconds. A beep indicates you are in Memory
mode. The most recently captured picture are displayed.
• With the right (9) button you can scroll through all the pictures in the memory.
The capture date and time is displayed for your information.
• New pictures are always stored in the memory. Older pictures then move down a space.
The picture last in line will disappear from the memory.
• The LED will stop flashing after you have watched all new pictures.
• In the top-right corner of the picture you can see which camera took this picture.
• To exit the Memory Mode, pick up the handset. The mode will also be exited if a visitor calls
from the door unit.
4. Other Functions:
• The Memory LED indicator (11) flashes (quickly) to indicate that a major power failure occurred
and the time and date need to be reset (See: M229 Base Station Set-Up).
10
Memory LED indicator
© MARMITEK