Important - Klarstein 10032580 Mode D'emploi

EN
60

Important:

Burner lines must be
reconnected to the valve
ports.
Note on reinstalling the burners
The burners have already been made to meet high requirements. Contact the
manufacturer or after-sales service if a burner needs to be replaced.
Cleaning the outer surfaces
• Use a mild detergent or baking soda and a warm water solution. Non-abrasive
powders can be used to remove stubborn stains. Then rinse with water.
• If the inside surface of the grill cover looks like peeling paint, solidified grease
deposits have turned to coal and are peeling off.
• Thoroughly clean the inside surface with a strong soap solution in hot water.
• Then rinse everything with clear water and let it dry completely. Never use a stove
cleaner.
Storage of the grill
• Indoor storage is only possible if the connection to the gas cylinder has been
disconnected and removed from the unit
• The device should be stored in its original packaging in a dust-free environment
when not in use for an extended period of time.
Valve
Burner