Component Names - NSK iProphy mobile Mode D'emploi

2

Component Names

(B) Battery charge
indicator
(2) SPEED key
Operation Panel
Indicators on operation panel
(A) SPEED lamp
The speed is indicated by lamps.
SPEED
500rpm
1,000rpm
1,500rpm
2,000rpm
2,500rpm
(B) Battery charge indicator
This indicator lamp lights up during battery charging.
(C) Battery indicator
Battery power is low. Charge the rechargeable battery when this indicator lamp lights up.
(1) POWER key
Used to turn the power on and off. Pressing and holding
Head
down
(3) ON/OFF key (2) SPEED key
Used to set the speed of the motor. Every time
pressed the speed increases one step. After the speed
reaches the maximum setting and the button is pressed
again the handpiece returns to the lowest speed.
The setting range is 500 to 2,500rpm ( Refer to the
SPEED lamp on the operation panel).
(3) ON/OFF key
(C) Battery
Pressing the key momentarily activates the motor
indicator
(A) SPEED lamp
handpiece and pressing it again stops rotation. (Alternate
operation)
Pressing and holding down the ON/OFF key rotates the
(1) POWER key
motor handpiece while the button is being pressed.
Releasing the ON/OFF key stops rotation. (Temporary
rotating operation)
SPEED lamp
Keys on operation panel
switches the power between ON and OFF.
6
is