NSK iProphy mobile Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• Portable and mobile RF communications equipment can affect Medical Electrical equipment. Do not use RF
equipment near the product.
• During operation this product may interfere with computers, LAN cables in vicinity of use or could cause
noise in radio receivers nearby.
• U.S. Federal law restricts this device to sale by or on the order of a licensed physician.
• Turn off the switch after using the product. When the product is not used for a long period, disconnect the
AC adaptor from the outlet.
• The AC adaptor is a fast way to cut off the commercial power supply. Therefore, install the AC adaptor in
such a way that it can be quickly disconnected from the outlet in an emergency. Do not place any object
within 6 inches of the AC adaptor.
• When disconnecting the AC adaptor, be sure to hold the adaptor body. Disconnecting by pulling on the cord
may damage the cord.
• Refer to the disposable handpiece operation manual for information on the use and handling of the
disposable handpiece.
• Do not store the product in a place exposed to strong direct sunlight. This may cause discoloration of the
handpiece body.
• Users are responsible for the operational control, maintenance and continual inspection of this product.
• If the product is not used for a long period check for vibration, noise and overheating before using on a
patient.
• Repairs of this product are only to be performed by authorized service technicians according to NSK
requirements. Contact your Authorized NSK Dealer if repairs are necessary.
• No special training is required prior to using this device.
• The end user shall be responsible for any judgment on use of this product on a particular patient.
• The maximum rotation speed of the motor handpiece is 2,500rpm (in the full charge state).
• The speed of the motor handpiece may get slower than the preset speed when the battery capacity lowers
during use.
NOTICE
4

Publicité

Chapitres

Table des Matières
loading

Table des Matières