Data Hold; Auto Power Off - Amprobe AMP-25 Mode D'emploi

Data Hold

Press HOLD button to freeze the display reading (HOLD is
displayed) and releases the reading when pressed a second
time.
Warning
W
To avoid possible electric shock or personal injury, when
Display HOLD is activated, be aware that the display will
not change when you apply a different current.
Press
HOLD HOLD
DC 100A 0A
HOLD
Note: During data hold, the display flashes if the measured
signal is 50 counts larger than the display reading. The
Meter cannot detect across the AC and DC current.

Auto Power Off

The Meter turns off if there is no button pushed operation
for 20 minutes.
To turn the Meter back on, press button and release to
restart the Meter. The Meter goes into default mode (auto
AC/DC A) when the Meter is turned back ON.
11