Operation And Maintenance - AquaScape ULTRAKLEAN 2000 Mode D'emploi

NOTe: Do not use tools
to attach the fittings.
• select the Multi-Hose adapter based on the diameter of
the tubing you are using. it is recommended to use as
large of a diameter of tubing as possible (up to 1 ½ inch
diameter) in order to achieve maximum water flow.
• if using a diameter pipe larger than the smallest section
of the Multi-Hose adapter, trim off the smaller sections to
avoid flow restriction.
Hosetail ready for ¾" tubing
Hosetail ready for 1¼" tubing
cut here
• we recommend using a hose clamp (not included)
to secure tubing onto the fitting.
Installation of stainless steel hose clamp
www.aquascapeinc.com | ☎
Hosetail ready for 1" tubing
cut here
Hosetail ready for 1½" tubing
cut here
stainless steel
hose clamp
Kink-Free
tubing
CAN 1-866-766-3426 | ☎
• after completing the plumbing plug the pump and the
ultraKlean pond filter to an outlet that is protected
™
by a ground fault interrupter (gfi). once the pump is
running and water is circulating through the ultraKlean
pond filter, check for any fitting leaks where the external
connections are made. since the filter is located outside
the pond even a small leak must be corrected.

OPEratiOn and MaintEnanCE

• the following diagrams illustrate the flow of water during
the "filtration" setting and the flow of water during the
"backwash" setting.
watEr FlOw dUring FiltratiOn
4
1 Water inlet
diffuser evenly
distributes debris
2 UltraKlean BioBalls
™ ™
provides efficient non-
clogging biological &
mechanical filtration
3
Debris filtered prior
to entering UV
4
Filtered water
US 1-866-877-6637
1
2
3
™
7