General Maintenance; Replacement Parts - AquaScape SIGNATURE Serie Manuel D'instructions

General Maintenance

• The Signature Series BioFalls Filter is designed to require once-a-year cleaning when used in combination with a Signature
Series Skimmer or Pondless
it reaches the Signature Series BioFalls Filter. The Signature Series BioFalls Filter also has an optional drain kit (see page 5),
which allows for easier water changes and annual cleaning of the filter.
• DO NOT clean the filter mats or filter media bag in the Signature Series BioFalls Filter more than once a year. Cleaning them,
especially with chlorinated tap water, more than once-a-year will reduce or kill the beneficial bacteria growing on these
filters. Replace old filter mats after several years when they begin to tear or fall apart.

Replacement Parts

Signature Series BioFalls Filter Replacement Parts
No. Description
1. 29283 – Signature Series BioFalls Filter 2500 Rock Tray
2. 29010 – Signature Series BioFalls Filter 2500 Mat
3. 29281 – Signature Series BioFalls Filter 2500 Support Rack
4. 29220 – Signature Series BioFalls Filter 2500 Lip
30078 – Signature Series BioFalls Filter 6000 Brass Screw Set
5.
1/4"-20 x 3/4" (8/bag x2)
6. 29282 – Signature Series BioFalls Filter 2500 Waterfall Stone
7. 29103 – 2" Bulkhead Fitting
29104 – 3" Bulkhead Fitting
7.
(Signature Series BioFalls Filter 6000 Only)
1. 29316 – Signature Series BioFalls Filter 6000 Rock Tray
2. 29318 – Signature Series BioFalls Filter 6000 Mat
3. 29317 – Signature Series BioFalls Filter 6000 Support Rack
4. 29324 – Signature Series BioFalls Filter 6000 Lip
Waterfall Vault prefilter. These filters ensure that large debris is filtered from the water before
®
1
7
3
5
4
2
6
9