Bialetti Mokissima Instructions D'emploi page 35

b
....DECALCIFICATION CYCLE
• Periodically carry out a decalcifi cation cycle.
Carrying out this procedure with greater or lesser frequency depends on the hardness of the water being
used.
• Fill tank (5) with water up to maximum level.
• Pour a dose of decalcifying liquid (non toxic and commercially available and suitable for coffee machines)
into water tank (5).
Check that dial (17) is in position "
• Press on/off switch
• Insert fi lter holder (10) into its housing (fi g."E").
The fi lter holder needs to be inserted correctly, otherwise the machine cannot operate.
• Place a cup on the grill (6) under the fi lter holder spout.
• Wait for the lit ON/OFF switch
the dial (17) to position "
• To stop delivery, turn dial (17) again to position "
• Repeat this procedure 2/3 times until all the water in the tank has been used.
To remove all residues from the circuit, at the end of procedure, repeat the procedure as described
above using only clean water.
When using decalcifying products, always follow the directions found on the package provided by the
product manufacturers.
".
(15) to turn machine on. Wait until light turns on and stays lit.
(15) to light up and stay on (if not, the pump will not start), then turn
" to start pouring from the fi lter holder nozzle.
".
EN
33