Electrical Connection - Angelo Po 0G0FR3E Manuel D'utilisation Et D'installation

A variety of optional installation kits
are available for arranging applian-
ces in banks:
D)"Over cupboard" installation kit.
E)Supporting frame kit

ELECTRICAL CONNECTION

Important
The connection must be made by author-
ised, skilled personnel, in accordance with
the relevant legal requirements, using ap-
propriate and specified materials. The appli-
ance is supplied with operating voltage
400V/3N, which can be switched to 230V/3
(see next point).
Connect the appliance to the mains electricity sup-
ply as follows.
1 - If not already present, install a circuit-breaker
(A) with overload cutout and differential safety
breaker close to the appliance.
2 - Remove the control panel (B).
3 - Connect the circuit-breaker (A) to the terminal
board (C) of the appliance as shown in the dia-
gram and in the electrical system diagram at the
back of the manual.
N.B.: use a cable with at least H05RN-F cha-
racteristics.
Important
When connecting, take care to connect the
neutral and earth lines.
4 - Replace the control panel (B) on completion of
the operation.
D
Caution - warning
Before doing any work, cut off the mains
electricity supply.
B
- 13 -
A
C
E
IT
GB
DE
FR
ES
IDM-39604002300.tif
English