Angelo Po 0G0FR3E Manuel D'utilisation Et D'installation page 26

FILTERING OIL
To carry out this operation, proceed as follows.
Important
Before proceeding, allow the appliance to
cool for 10-15 min., so that the oil reaches a
temperature between 50-120°C.
1 - Place the container (B) and the filter (C), both
available as optionals, underneath the drain
pipe (A).
2 - Use the lever (D) to turn on the tap and empty
the well.
3 - Use the lever (D) to turn off the tap when the
procedure is complete.
Caution - warning
Do not dump oil in the environment; dispose
of it in accordance with the laws in force in the
country of use.
If the appliance is to be out of use for a lengthy
period, proceed as follows:
1 - cut off the mains electricity supply using
the appliance's master switch;
2 - clean the appliance and the surrounding areas
thoroughly;
IT
USEFUL ADVICE FOR USE
To ensure correct use of the appliance, the following
GB
rules should be adopted:
– Use only the accessories recommended by the
DE
constructor.
– Use the baskets as appropriate.
FR
– Before filling the well, check that the drain tap (A)
is turned off.
– Check that the oil level never drops underneath
ES
the minimum level marked (B).
– Use single-seed oils or blends of oils specially re-
commended for fryers.
– Melt solid fats in a separate container to avoid da-
maging the appliance.
– Do not use the appliance until the oil is at working
temperature.
– Lower the basket slowly to prevent foaming.
– Filter the frying oil often to remove working resi-
dues.
– Never use the appliance with no oil in the well, as
English
LENGTHY APPLIANCE DOWNTIMES
D
3 - spread a film of edible oil over the stainless steel
surfaces;
4 - carry out all the servicing procedures;
5 - leave the appliance uncovered and the cooking
chambers open.
B
B
A
this may damage its structure.
– Use the basket hanger support to drain the foods
fried.
- 8 -
A
C
B
IDM-3960401900.tif
IDM-39604002000.tif