Source Name - Paradigm Soundscape Manuel De L'utilisateur

MENU OPTIONS
Menu Option: SUB
'SUB' > 'WIRELES' [WIRELESS]> 'PAIRING STARTED' >
'PAIRED' OR 'FAILED': These messages, visible on the
Soundscape's front-panel display, let you know that your
Soundscape is transmitting a signal that will be picked up by
the supplied wireless subwoofer receiver to initiate pairing
with the external subwoofer.
TIP! With all the options on the previous page, the
Soundscape will operate to approximately 80 Hz below
which the external subwoofer will reproduce lower bass
frequencies.
Menu Option: SOURCE NAME
'SRC.NAM' [SOURCE NAME]: Enter the 'SRC.NAM' submenu
by pressing the 'Scroll Right' directional button. The
settings in this menu will allow you to assign new names to
display on the soundbar when changing inputs. For example,
you can program the 'OPTIC 1' input to display 'DVD'.
Using the 'Scroll Up'
you can select and program the following input names:
• OPTIC 1 [DIGITAL OPTICAL 1]
• OPTIC 2 [DIGITAL OPTICAL 2]
• COAX [DIGITAL COAXIAL]
• ANALOG [LEFT/RIGHT RCA ANALOG]
• BLUTTH [BLUETOOTH]
Choose the input name you want to reprogram and press
the 'Scroll Right' directional button. The Soundscape will
display the current name. Pressing the 'Scroll Up'
Down' directional buttons will cycle through the available
alpha-numeric characters. Pressing the 'Scroll Left' / 'Scroll
Right' directional buttons will move to the next space.
You can use up to seven characters when inputting a new name.
To finish programming an input name, use the 'Scroll Left' /
'Scroll Right' directional buttons to move all the way to the
left or right.
EN-21
Cont'd
Cont'd
/ 'Scroll Down' directional buttons,
/ 'Scroll
Menu Option: LEARN
PLEASE NOTE: There may be remotes that the
Soundscape cannot learn or cannot learn correctly. Due
to the number of remotes on the market it is impossible
to advise which remotes will or will not work.
PLEASE NOTE: When learning from a second remote, you
may find it does not have buttons that directly correspond
with all available soundbar commands. Not all commands
have to be programmed. Some remotes offer 'Function'
buttons (F1, F2, etc.) that can be used to program unique
soundbar commands.
PLEASE NOTE: Some remote controls offer discrete 'Power
On' and 'Power Off' buttons. Some offer a single button
to toggle power on and off. The learning function of the
soundbar allows you to program either scenario.
'LEARN': Enter the 'LEARN' submenu by pressing the
'Scroll Right' directional button. The settings in this menu
program the soundbar to respond to a second remote
control. Soundscape's factory supplied remote control will
always work with the soundbar, even if the soundbar is
programmed to respond to a second remote.
Using the 'Scroll Up' / 'Scroll Down'
you can 'Select' and program the following commands:
• PWR.TGL [POWER TOGGLE]
• PWR.ON [POWER ON]
• PWR.OFF [POWER OFF]
• VOL + [VOLUME +]
• VOL – [VOLUME –]
• MUTE [MUTE VOLUME]
• NX.INPT [NEXT INPUT]
• PR.INPT [PREVIOUS INPUT]
• OPTIC 1 [OPTICAL 1 INPUT]
• OPTIC 2 [OPTICAL 2 INPUT]
• COAX [COAXIAL INPUT]
• ANALOG [LEFT/RIGHT
RCA ANALOG INPUT]
directional buttons,
• BLUTTH
[BLUETOOTH INPUT]
• BT PRV
[PREVIOUS TRACK]
• BT PLPS [PLAY/PAUSE]
• BT NXT [NEXT TRACK]
• UP
• DOWN
• LEFT
• RIGHT
• SELECT
• MENU
• MOVIE
• MUSIC