The Menu System; Entering And Exiting The Menu; From The Soundscape's Top Panel; Via The Soundscape's Remote - Paradigm Soundscape Manuel De L'utilisateur

Power Control
Power On/O

THE MENU SYSTEM

ENTERING AND EXITING THE MENU

SYSTEM

From the Soundscape's Top Panel

Volume &
To access the Menu System from the Soundscape's top panel,
Source Controls
press and hold the 'Menu' button (Fig. 13).
Via the Soundscape Remote
To access the Menu System from the remote, press 'Menu' Prev Source
Power Control
(Fig. 14). To exit, press 'Menu' again or select the 'Left' button.

How to Use the Navigation Buttons

Power On/O
HOW TO USE THE
Power Control
NAVIGATION BUTTONS
'Menu' button enters top Power On/O
level menu or exits the
Volume &
menu system.
Source Controls
'Right' arrow button goes
down deeper into a menu.
Volume & Prev Source
Source Controls
'Left' arrow button and
Prev Source
for exiting the menu.
'Up' button increases
the value of a setting
(i.e. volume) or scrolls up
through options
'Down' button decreases
the value of a setting (i.e.
volume) or scrolls down
through options
'Select' button chooses/
sets options and exits
menu level.
EN-19
REMOTE
TOP PANEL
Power Control
CONTROL
Power On/O
Power Control
Power Control
Power Control
Power On/O
Volume &
Power On/O
Source Controls
Power On/O
Prev Source
Volume &
Source Controls
Volume &
Volume &
Source Controls
Source Controls
Prev Source
Prev Source
Prev Source

MODE

MODE
MODE

MENU OPTIONS

Menu Option: MODE
'MUSIC': Scroll to select 'MUSIC'. To choose 'MUSIC', press
'Select' then 'Scroll Up'
all of the additional mode options.
'MOVIE': Scroll to select 'MOVIE'. To choose Movie press
Volume Up
'Select' 'Scroll Up' or 'Scroll Down'
the additional mode options.
Next Source
'LOUDNES' [LOUDNESS]: Enter the 'SUROUND' submenu
by pressing the 'Scroll Right' directional button. To activate
Volume Down press 'Select' for 'ON', to deactivate press 'Select' for 'OFF' .
'BASS': Enhance (+) or decrease (-) bass output in 2-dB
increments. Activate by pressing the 'Scroll Right' directional
button, find your desired setting, press 'Select' and the
Soundscape will respond with 'SET' .
'TREBLE': This mode allows you to enhance (+) or decrease
(-) treble output in 2 dB increments. Activate by pressing the
Volume Up
'Right' directional button, find your desired setting, press
'Select' and the Soundscape will respond with 'SET' .
'SUROUND' [SURROUND]: Enter the 'SUROUND' submenu
Next Source
engage Paradigm's Virtual Surround Sound by pressing the
Volume Up
'Scroll Right' directional button. This menu allows you to turn
Volume Up
Volume Down
Soundscape's surround channels 'ON' or 'OFF'.
Next Source
'SUROUND' 'ON' [SURROUND ON]: This option configures
>
Next Source
the Soundscape (when it detects 5.1-channel encoded content)
to fully reproduce all 5.1-channels of information including
Volume Down
simulated surround channels.
Volume Up Volume Down
the 'Select' button and the Soundscape will respond with 'SET' .
Volume Up
Volume Up
'SUROUND' >'OFF' [SURROUND OFF]: This option configures
Next Source
the Soundscape (when it detects 5.1-channel encoded
Next Source
content) to down-mix to 3.1-channel output (left/center/right
Next Source
channels + external subwoofer) and does not use simulated Volume Down
surround channels. All content originally intended for the
Volume Down
Volume Down
surround channels is routed to the left/center/right channels.
Activate the option by pressing the 'Select' button and the
Soundscape will respond with 'SET' .
TIP! Both multichannel and stereo sound can be heard as
surround. When not in Surround Mode, the Soundscape's
default Mode is 'Stereo' .
or 'Scroll Down' to activate any/
to activate any/all of
Activate the option by pressing
to