Service Notes - Revell Control STEADY QUAD CAM Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
TROUBLESHOOTING
Problem: The propellers do not move.
Cause:
A) No connection has been established.
B) The battery is too weak or depleted.
Remedy: A) Switch everything off and switch on again in the correct sequence.
B) Charge the battery.
Problem: The model stops and descends during flight for no apparent reason.
Cause:
• The battery is too weak.
Remedy: • Charge the battery.
Problem: The model cannot be controlled with the remote control.
Cause:
A) The ON/OFF switch is in the „OFF" position.
B) The batteries were not inserted correctly.
C) The batteries do not have enough power.
Remedy: A) Set the ON/OFF switch to the „ON" position.
B) Check whether the batteries are inserted correctly.
C) Insert new batteries
Problem: The model only turns on its vertical axis or rolls over when started.
Cause:
• Incorrect arrangement of the propellers.
Remedy: • Install the propellers and arms as outlined in the manual.
Problem: The model will no longer fly loops.
Cause:
• Battery too weak.
Remedy: • Charge the battery.
Additional tips and tricks can be found online at www.revell-control.de.

SERVICE NOTES

Go to www.revell-control.de for ordering information
and tips on replacing spare parts, plus other useful
information on all Revell Control models.
26
www.revell-control.de
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

23922

Table des Matières