Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Using the cordless handset:
10.1
Set the handset language
Press
and
/
to select "HS SETTINGS".
Press
and
/
Press
and
/
Press
to confirm.
10.2
Set the Auto Answer
If you turn on the Auto Answer, you can answer a call automatically by just lifting the handset off the base
or charger, without having to press any key.
Press
and
/
to select "HS SETTINGS".
Press
and
/
to select "AUTO ANSWER".
Press
and
/
to turn on or off the auto answer feature.
Press
to confirm.
10.3
Base Settings
10.3.1
Set the base language
In Idle:
Press
and
/
to select "LANGUAGE".
Press
and
/
to select your desired language.
Press
to confirm.
10.3.2
Reset your phone
You can reset your phone to the default settings. After a reset, all your personal settings, call list entries,
redial list entries, and answering machine messages will be deleted but your phonebook remains
unchanged:
Press
and
/
to select "DEFAULT".
Press
to display "PIN?-----".
Enter the 4-digit system "PIN" (default 0000).
Press
to display "CONFIRM?"
Press
to confirm, and the phone will be reset to its default settings.
10.3.3
Base default
You can reset all of your base settings to their default settings. After a reset, all your personal base settings,
call list entries, redial list entries, direct memory entries, and answering messages will be deleted, but any
phonebook entries will be kept:
Press
and
/
to select "SETTINGS".
Press
and
/
to select "BS DEFAULT".
Press
and display will show "PIN?", enter the 4-digit PIN (default setting is 0000).
Press
to confirm, and base will return to the previous menu.
11
HANDSET REGISTRATION
Important:
When you purchase your phone system, all cordless handsets are already registered to your base, so you
do not need to register them.
Handset registration is only necessary when you buy extra cordless handsets or if a cordless handset has
become faulty.
You can register additional cordless handsets to have up to 5 handsets per base unit, with each handset's
number (1 to 5) shown on its display.
A cordless handset can be registered to only one base at a time.
To check whether a handset is registered, make sure mains power to the base unit is switched on and the
handset is within range. The handset's display should show its number and the
on. If the display shows "REGISTER ", you need to register the handset again using the following process:
to select "LANGUAGE".
to select the desired language.
13
icon should be steadily
Publicité
Table des Matières
