Cabinet Installation; Important - IKEA KONSISTENS Mode D'emploi

5. Cabinet Installation

IMPORTANT!

Do not lift or manipulate the oven by the door
handle or the control panel.
WARNING!
Heavy Weight Hazard
• Use 2 or more people to move and install wall
oven.
• Failure to follow this instruction can result in
injury or damage to the unit.
1. Unpack the wall oven. Remove the bottom trim
taped on the oven top panel.
2. Find the 2 anti-tip mounting screws included in
the literature package.
3. Insert the oven into the cabinet opening. Slide
oven inward leaving 1½" (3.8 cm) clearance
between the oven and front of cabinet (see
Figure 5).
4. Pull the armored cable through the hole for it in
the cabinet and toward the junction box while
moving the appliance inward.
5. Push the oven in and against the cabinet.
1½" (3.8 cm)
clearance
between unit
Figure 5
6. Install the Anti-tip Mounting
Screws
WARNING!
The wall oven can tip when the door is open. The
anti-tip mounting screws supplied with the wall
oven must be installed to prevent tipping of the
wall oven and injury to persons.
A. The mounting holes in the side trims may
be used as a template to locate the appliance
mounting screw holes (see figure 6).
B. Use the two screws supplied to fix the
appliance to the cabinet.
Anti-Tip Mounting Holes
Tip Over Hazard
• A child or adult can tip the oven
and be killed.
• Install the anti-tip device to oven
and/or structure per installation
instructions.
• Ensure the anti-tip device is re-engaged when the
oven is moved.
• Do not operate the oven without the anti-tip device
in place and engaged.
• Failure to follow these instructions can result in
death or serious burns to children and adults.
Anti-tip mounting holes
Figure 6
Refer to the installation
instructions supplied with your
appliance for proper installa-
tion.
Check for proper installation
with a visual check that the
anti-tip screws are present.
Test the installation with light
downward pressure on the
open oven door. The oven
should not tip forward.
9