Safety - TechniSat DIGITRADIO UP 1 Mode D'emploi

1.2.1 Safety

For your own safety, you should read through the safety precautions carefully before
you put your DIGITRADIO UP1 into operation. The manufacturer accepts no liability
for damage caused by inappropriate handling, or by non-compliance with the safety
precautions.
This device is only intended for installation. Only a licensed specialist is allowed
to connect devices without connectors. Risk of electric shock! In the event of
damage resulting from incorrect connection, no warranty claim can be made.
Do not open the device under any circumstances!
Touching live parts poses a danger to life!
Any necessary repairs to the receiver should only be carried out by qualified
personnel.
The device must only be operated in an appropriate climate.
Do not expose the device to dripping or splashing water. If water has
penetrated the device, switch it off and inform the Service department.
Do not expose the device to heat sources that will heat it up more than
normal use.
If you detect a device defect, odour or smoke, considerable malfunctions,
or damage to the housing, switch off the device and inform the Service
department.
The device must only be connected to a mains voltage of 100V-240V~, 50/60
Hz.
Never try to operate the device with another voltage.
If the device shows signs of damage, it may not be put into operation.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
7