Source Selection; Dab/Dab; What Is Dab; Data Compression - TechniSat DIGITRADIO 20 CD Mode D'emploi

To switch to the submenus, first of all rotate the SCROLL&SELECT knob until the
desired submenu is displayed and then press the SCROLL&SELECT knob to retrieve
the submenu. An asterisk (*) highlights the current selection.
Closing the menu: press the MENU button repeatedly (depending which
submenu you are in), until the current source is displayed again.
Settings are not saved until the SCROLL&SELECT knob has been pressed. If
the MENU button is pressed instead of this, the settings are not accepted or
saved (the MENU button in this case acts as a "Back" button).
The functions and buttons to be pressed are shown in bold in this instruction
manual. Displays in [square brackets].
Some text (e.g. menu items, station information) may be too long to show on
the display. These will be then shown as running text shortly thereafter.

6.1 Source selection

> Press the MODE button as often as required until the desired source is shown
on the display. You can choose between DAB, FM, AUX and CD modes.

7 DAB/DAB+

7.1 What is DAB+?

DAB+ is a new digital format through which crystal clear sound with no noise can
be heard. In contrast to conventional analogue radio stations, DAB+ can be used to
broadcast multiple stations on one and the same frequency. This is referred to as
an ensemble or multiplex. An ensemble is comprised of the radio station, as well as
several service components or data services, which are broadcast individually by the
radio stations. There is information at
example.

7.1.1 Data compression

With this, digital radio takes advantage of the properties of human hearing. The
human ear does not perceive sounds which are found under a specific minimum
volume. Data which are found under the so-called audibility threshold can, therefore,
be filtered out. This is possible because, in a digital data stream, the relevant relative
volume for other units is saved for every unit of information. Moreover, in an audio
signal, the quieter parts are superimposed by louder ones at a specific limit value.
All the sound information below the threshold of hearing in a piece of music can be
filtered out of the signal to be broadcast. This leads to a reduction of data in the data
stream to be transmitted, with no perceptible difference in sound for the listener (HE
AAC v2 process as a supplementary codification process for DAB+).
www.digitalradio.de or www.digitalradio.ch, for
EN
FR
IT
NL
NW
DK
PL
CZ
SK
19