Set Point - S&P CTB ECOWATT Instructions De Montage Et D'utilisation

SET POINT CONSOLE
< 1300m3/h OK
OK OK
PARAMETERS
< Kq=133 OK
OK OK
PARAMETERS
< Kp=100 OK
OK OK
PARAMETERS
< Ki=20 OK
OK OK
SENSOR IN1
<SIN SENSOR OK
OK OK
SP-2 FLOW
< 50% OK
OK OK

SET POINT

<IN2 4-20mA OK
Set Point:
- INTERNAL: Factory set value
- CONSOLE: Value set by PROSYS ECOWATT console
- IN1/IN2 0-10V: Value set by external potentiometer (0-10V)
- IN1/IN2 4-20mA: Value set by external potentiometer (4-20mA)
Press or to manually modify the set point
parameter. This will appear if "
selected in "
SET POINT
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter.
This value corresponds to the % of pressure set point
being the fan in night mode. To connect a time clock or
potential-free switch to the digital input J11
46
" has been
CONSOLE
" menu.