Operation Cav/Pi Volume Mode - S&P CTB ECOWATT Instructions De Montage Et D'utilisation

PROGRAM C:1?
< NO YES
SI SI
Program OK
>
<Press any key
OK OK
6.6.3. Operation PI VOLUME/CAV mode
Before selecting PI VOLUME/CAV mode using PROSYS ECOWATT console, it is necessary to change pressure taps confi gura-
tion. Place tubes marked with "V" and "P" as is represented below.
Once changed the operation mode to PI VOLUME/CAV, following parameters will appear:
MIN-OUTPUT
< 20% OK
OK OK
MAX-OUTPUT
< 100% OK
OK OK
SETUP LEVEL 2?
< NO YES
OK OK
Save parameters modified
Press any key to return to main screen
Operation PI VOLUME/CAV mode
Press or to manually modify the minimum
output parameter to the motor
Press or to manually modify the minimum
output parameter to the motor
Access to advanced configuration parameters
44