Error Codes - Pando PLT-7460 Manuel D'installation Et D'utilisation

ERROR CODES

If there is a malfunction, the dishwasher will display error codes to identify these:
Codes
E1
E3
E4
E8
E9
EC
Ed
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
Meanings
Longer inlet time.
Not reaching required
temperature.
Overflow.
Failure of orientation
of distributary valve.
Keep pressing a button
more than 30 seconds.
Washing control system
fail.
Failure of communication
between main PCB with
display pcb.
Possible Causes
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
Malfunction of heating element .
Some element of dishwasher leaks .
Open circuit or break of distributary valve.
Water or something on the button.
PCB or motor fail.
Open circuit or break wiring for the
communication.
201