Positioning The Appliance; Levelling The Appliance; Built-In Installation - Pando PLT-7460 Manuel D'installation Et D'utilisation

Positioning The Appliance

Position the appliance in the desired location. The back should rest against the wall
behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is
equipped with water supply and drain hoses that can be positioned either to the right
or the left sides to facilitate proper installation.

Levelling the appliance

Once the appliance is positioned for levelling,
the height of the dishwasher may be altered via
adjustment of the screwing level of the feet.
In any case,the appliance should not be inclined
more than 2°.
NOTE:
Only apply to the free standing dishwasher.

Built-In Installation

Step 1. Selecting the best location for the dishwasher
The installation position of
hose and power socket
Illustrations of cabinet dimensions and installation position of the dishwasher.
1. Less than 5 mm between the top of dishwasher and cabinet and the outer door
aligned to cabinet.
the dishwasher should be near the existing inlet and drain
.
90 °
Electrical, drain Electrical, drain
820mm 820mm
and water supply and water supply
line entrances line connection
580mm 580mm
Space between cabinet Space between cabinet
bottom and floor bottom and floor
for 60cm model
600 mm(
mm for 45cm model
450 (
209
90 °
80 80
100 100
)
)