Error Codes - Pando PLT-7260 Manuel D'installation

ERROR CODES

If there is a malfunction, the dishwasher will display error codes to identify these:
Codes
E1
E3
E4
Failure of orientation
E8
of distributary valve.
Washing control system
EC
fail.
Failure of communication
Ed
between main PCB with
display pcb.
WARNING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
Meanings
Longer inlet time.
Not reaching required
temperature.
Overflow.
Possible Causes
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
Malfunction of heating element .
Some element of dishwasher leaks .
Open circuit or break of distributary valve.
PCB or motor fail.
Open circuit or break wiring for the
communication.
208