Filling The Detergent Dispenser - Pando PLT-7460 Manuel D'installation Et D'utilisation

Filling The Detergent Dispenser

1
Sliding it to the right
2
1 Please choose an open way according
to the actual situation.
1. Open the cap by sliding the release
catch.
2. Open the cap by pressing down the
release catch.
NOTE:
Be aware that depending on the soiling of water, setting may be different.
Please observe the manufacturer's recommendations on the detergent packaging.
Press down
A A
B B
2
Add detergent into the larger cavity
(A) for the main wash cycle .
For better cleaning result, especially if
you have very dirt items, pour a small
amount of detergent onto the door.
The additional detergent will activate
during the pre-wash phase.
3
Close the flap by sliding it to the
front and then pressing it down.