Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Dimensions and Cabinet Requirements
Appliance Dimensions
Cabinet Dimensions
General Cabinet Requirements
All models require:
¼" (6.4 mm) space between the side of the appliance
▯
and an adjacent wall or cabinet door when installed at
the end of a cabinet run.
The cabinet base must be flat and capable of
▯
supporting a weight of at least 150 lbs (68 kg).
Unit under the counter
*
Includes
" (19 mm) base plate
_
**
For singel ovens installed under a countertop, the
junction box may be located to the left, or the right
of the unit, within reach of the power conduit.
6
*** This part of furniture must be present, straight and
have no gap with the lateral parts. The minimum
height is 3/8" (9 mm).
If the built-in oven is installed underneath a cooktop, pay
attention to the installation instructions of the cooktop.
Wall mounted unit
*
For wall installations, the junction box may be
located above or below the unit within reach of the
power conduit.
Publicité
Chapitres
Table des Matières
