Before You Start - Toro 22602 Manuel D'installation

Operation
Note: Determine the left and right sides of the
machine from the normal operating position.
Important: Before operating, check the fuel
and oil level, and remove debris from the
traction unit. Also, ensure that the area is clear
of people and debris. You should also know and
have marked the locations of all utility lines.

Before you start:

Dig away the earth and remove any stones near the
tree stump that may interfere with your work.
Check that the ground is free of foreign objects,
such as electrical cables, barbed wire, etc.
Cut or trim the stump as necessary using a power
saw.
Review all the machine's safety decals.
Use a hard-hat, hearing, and eye protection. A
mesh visor alone does not provide sufficient eye
protection; supplement with protective glasses.
Make sure that you are familiar with safety
regulations and shutdown procedures described in
the Operator's Manual.
Make sure that all guards are in place and in good
condition.
Make sure that the blades and cutters are in place
and in good condition.
Make sure that the work area, cutter, and stump in
particular are free from metallic objects such as
wire, nails, etc. that could be thrown out and injure
persons in the vicinity and damage the equipment.
Make sure that everyone, including children and
animals, maintain a distance of at least 50 feet
(15 m) from the machine. Debris can be thrown
out and injure people and animals.
11