Using Stabilizer/Conditioner; Filling The Fuel Tank - Toro 22602 Manuel D'installation

Using Stabilizer/Conditioner

Use a fuel stabilizer/conditioner in the traction unit to provide the following benefits:
• Keeps gasoline fresh during storage of 90 days or less. For longer storage it is recommended
that the fuel tank be drained.
• Cleans the engine while it runs
• Eliminates gum-like varnish buildup in the fuel system, which causes hard starting
Important: Do not use fuel additives containing methanol or ethanol.
Add the correct amount of gas stabilizer/conditioner to the gas.
Note: A fuel stabilizer/conditioner is most effective when mixed with fresh gasoline. To
minimize the chance of varnish deposits in the fuel system, use fuel stabilizer at all times.

Filling the Fuel Tank

1. Park the traction unit on a level surface and stop the engine.
2. Allow the engine to cool.
3. Clean around the fuel tank cap and remove it.
Note: The cap is tethered to the fuel tank.
4. Add unleaded gasoline to the fuel tank, until the level is just below the bottom of the
strainer neck.
Important: This space in the tank allows gasoline to expand. Do not fill the fuel tank
completely full.
5. Install the fuel tank cap securely, turning it until it clicks.
6. Wipe up any gasoline that may have spilled.
13
1
1. Maximum fuel level 2. Fuel tank top
2