Brandt AD786XE1 Guide D'utilisation page 7

99636141_ML_A.qxd 25/02/05
C
leaning your hood ?
MAINTENANCE
WHY?
HOW ?
Never use metal scouring pads, abrasive products or excessively stiff brushes.
To clean the body and the lighting port, you should use only commercial household cleaning products
diluted in water and then rinse using clean water, drying with a soft cloth.
Dismantling the filter cartridge
Fitting the carbon filter
1. Remove the cartridge.
2. Place the new carbon filter on the cartridge inside the hood.
3. Fit the two retention rods.
W
ho should I contact ?
Blemishes on the hood caused by abnormal use or cleaning with abrasive products which do not
cause the appliance to cease functioning or which do not cause it to become unsuitable for use will
not be dealt with by the manufacturer. Any repairs must be carried out by a qualified technician.
Only the distributors of our brand:
• Are fully familiar with your appliance and its operation • Are fully familiar with your appliance and its operation
• Fully apply our adjustment, maintenance and repair methods,
• Fully apply our adjustment, maintenance and repair methods,
• Use only original parts.
• Use only original parts.
To submit a complaint or to order spare parts from your distributor, please be sure to give him the
complete reference for your appliance (type of appliance and serial number).
You can find this information on the identification plate fitted inside the appliance.
The descriptions and characteristics featuring in this booklet are provided for information
purposes only, and are not binding upon us. Indeed, as part of our ongoing commitment to
improving the quality of our products, we reserve the right to make any modifications or
improvements necessary, without notice.
10:18 Page 7
The power supply to the hood must be turned off either by removing the plug or by
using the circuit breaker switch before you remove the metal filters. After cleaning, the
metal filters must be refitted in conformity with the instructions.
FILTER CARTRIDGE
Remove the protective film before using the
filter cartridge for the first time.
VITAL EVERY MONTH
This filter traps fatty vapours and dust. This
component plays an important part in
ensuring the effectiveness of your hood.
Use a commercial household cleaning product then
rinse abundantly and dry. This cleaning can be
carried out in your dishwasher in the vertical position
(ensure that the cartridge never comes into
contact with dirty crockery or silver
tableware).
(fig. 12)
MADE IN FRANCE
220 - 240V ~ 50 Hz
ACTIVATED CARBON FILTER
For
"recycling" mode.
To avoid all risks of fire.
This filter traps odours and must be
changed at least once a year
depending on your level of use.
You should order these filters from
your dealer (quoting the reference
shown on the ID plate located
inside the hood) and note the date
the filter was changed.
(fig. 10)
BRANDT APPLIANCES SAS
7 rue Henri Becquerel
92500 RUEIL MALMAISON
hoods installed in
VITAL EVERY YEAR GB
, ,