Brandt AD786XE1 Guide D'utilisation page 5

99636141_ML_A.qxd 25/02/05
L
" E P L U S " f o r a n a t t r a c t i v e i n s t a l l a t i o n
BRANDT cares about the appearance of your kitchen. You can now adjust the
hood to the tiles or credence. There is an adjustment margin of 10 mm in
relation to the wall " AN EXCLUSIVE BRANDT FEATURE ".
Before mounting your hood on the wall:
- Remove the metal filter.
- Remove the two screws (item 1).
- Slightly unscrew the four screws, but do not remove
them (item 2).
- Pull the lower section outwards.
- Assemble and mount the extractor duct as described.
- Adjust the lower section to be in contact with the tiles or
credence.
- Tighten the four screws (item 2).
- Install the metal filter.
10:18 Page 5
item 2
item 1
item 2
GB
10 mm
Detail of offset
Détail décalage
Wall/decorative feature
décor / mur