Cleaning And Care - Blumfeldt 10032987 Mode D'emploi

Lighting instructions
Place logs on the coal grid.
Note: Make sure that the wood lies centrally on the grille and does not reach
to the edge of the grille. The wood should not be stacked too high.
Then place light, dry wood chips under the logs.

CLEANING AND CARE

CAUTION
Danger of burns! Allow the garden fireplace to cool completely
before inspecting or cleaning it for damage.
Inspect the garden fireplace for damage
Check the garden fireplace regularly for damage to ensure product safety and
a longer service life.
1. Check all parts to make sure they are tight.
2. Check the components for damage and rust.
3. If you find damage to any component, have the heater repaired before
continuing to use it.
Cleaning
• Make sure that the fire is completely extinguished when you no longer use
the garden fireplace.
• Make sure that the fire is completely extinguished and the fireplace has
cooled down before removing the ashes.
• Use a damp cotton cloth to remove soot from the net cover and chimney
cover. Clean the fireplace regularly to ensure a long service life.
Note: The surface may discolour after repeated use.
• Do not clean the fireplace until the fire has completely burnt out and the
fireplace has cooled down.
• Do not use oven cleaner or scouring agents, as these can damage the
product.
• Clean the outside with water and a mild dishwashing liquid.
• For stubborn stains, use a citrus-based cleaner and a nylon brush.
EN
13