Telephone Operation; Make A Call; Preparatory Dialling - AEG Voxtel D135 twin Guide De Démarrage Rapide

8
7 INSTALLATION
7.1 Connecting the base station (see P4)
• Plug the power supply and line cord into the base station.
• Plug the power adapter into a 100-240 Vac 50/60Hz mains socket and
the line cord into your telephone line socket.
Warning:
Use only the provided adaptor, using other power supplies may cause a
hazard or damage the phone.
Install the base unit in a position where the mains adapter plug will reach
an easily accessible mains socket to unplug in case needed. Never try to
lengthen the mains power cable.
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
7.2 Installing and charging the batteries (see P3)
• Place the 2 supplied batteries into the battery compartment with
the polarity markings. Use only the NiMH rechargeable battery type
provided with the telephone.
• Position the battery compartment cover over the batteries and slide up
to click into place.
• Put the handset on the base and charge for 15 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
8

TELEPHONE OPERATION

8.1

Make a call

8.1.1

Preparatory dialling

• Enter the phone number and press to connect to the line and dial the
number.
>When entering the number, if you make a mistake, press " "(
to delete digits.
)