Preparation Before Installation - Airwell AW-FWDB018-N91 Manuel D'installation

1. To ensure the installation is correct, you must read the "INSTALLATION" in this manual.
2. After installation, the installer should explain the correct operation and
3. maintenance method (base on the manual) to the user, tell him/her to read and keep the INSTALLATION
AND OPERATION MANUAL carefully.
4. The warnings in this manual are all very important about safety, please be sure to comply.
Warning
• Please entrust the local dealer or the local service point to arrange someone who has the air conditioner
installation permit to take the installation. Forbid users to install it without permission.
• Please refer to this ma nuai strictly to install the air conditioner.
• Please be sure to use the accessory in this unit and the specified component parts.
• Please install on somewhere that can sustain the air conditioner.
• Please refer to this ma nuai and wiring specification of national electric equipment or base on actual
operation specification to construct the electric equipment.
• Please be sure to use the specified wires, forbid to share the same wire with other equipment.
• Forbid to use the wire which has plug in the middle. Forbid to use extension cord.
• Forbid to connect other load.
• Be sure to use the specified cable to connect the indoor and outdoor units.
• When connecting the indoor and outdoor units, please neatly put away the cable to avoid unnecessary
external force to the units.
• During the air conditioner installation or moving, please do not fill air (or other mixture gas) into the cooling
system except the specified refrigerant.
• If refrigerant leakage occurs during the installation, please take the ventilation.
• After installation construction, please make sure no refrigerant leakage.
• Make sure the air conditioner has correct and reliable grounding.
3.1 Select the installation location for the indoor unit
1. Please install on the location that meets the following conditions and has the
permission from user.
1) No thermo source and steam source around the installation location.
2) No obstacle which will hinder air circulation at the installation location.
3) Somewhere that has good air circulation and bath cool & hot air within reach.
4) Somewhere that is convenient to drain.
5) Somewhere that the ceiling is fiat and the structure must be able to sustain the weight of the indoor
unit, and do not increase the running noise and strengthen the vibration.
6) Somewhere that has the conditions of installation and repairing.
7) Somewhere that is convenient to fix pipe and put out wires.
8) Somewhere that avoids lampblack.
9) Keep distance of 1 meter at least from TV, audio devices etc.
10) Select the location that is easy to drain condensate, and easy to connect outdoor unit.
11) Keep far away from flammable materials, such as curtain, clothes especially.

3.Preparation before installation

4