Changing The Bulb; Halogen Bulbs Above; Halogen Bulb On The Ice And Water Dispenser; Service - Thermador T18BD Serie Guide D'utilisation Et D'entretien

Changing the bulb

m
WARNING
To avoid electrical shock which can
cause death or severe personal
injury, disconnect power to
appliance before making repairs.
After making repairs, reconnect
power.

Switch off the appliance with the
POWER button! Pull out the
mains plug or switch off the fuse.
CAUTION
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen bulb,
always hold with a soft cloth.

Halogen bulbs above

Halogen bulb type:
20 W/12 V/socket G4

Release the cover and remove from
the clip.

Pull out the defective halogen bulb.

Insert a new halogen bulb. Touch the
halogen bulb with a soft cloth only.

Attach the cover and connect to the
clip.
Halogen bulb on the ice
and water dispenser
Halogen bulb type:
m
5 W/12 V/socket G4

Pull out the defective halogen bulb.

Insert a new halogen bulb. Touch
the halogen bulb with a soft cloth
only.

Service

If you need service, first see the
"Troubleshooting" section of this book.
After checking "Troubleshooting",
additional help can be found by calling
the Thermador Customer Interaction
Center, 1–800–735–4328 (toll-free),
from anywhere in the U.S.A.
In Canada, contact your designated
Thermador Canada service company or
call 1–800–735–4328.
Write down the following information
about your freezer to better help
you obtain assistance or service if you
ever need it.
Dealer name:
Address:
Phone number:
Purchase date:
Model number:
FD number:
Serial number:
Type:
You will need to know your complete
model number and serial number.
You can find this information on the
model and serial number label located
on the inside wall of the freezer
compartment.
23