Entering New Programs In Addition To Those Already Entered; Changing The Current Hour; Changing The Calendar Setting; (Year, Month, Day, Switching Standard Time/Daylight Savings Time) - Perry Electric 7080 Serie Mode D'emploi

10 - ENTERING NEW PROGRAMS IN ADDITION TO THOSE ALREADY ENTERED

Programs which have remained free can then be programmed. Press
PROG to search for a free program, press
then enter the program as indicated in the
PROGRAMMING chapter. Return to "normal operating
status" by pressing PROG.

11 - CHANGING THE CURRENT HOUR

From normal operation, press
new setting and return to normal operation.

12 - CHANGING THE CALENDAR SETTING

To access calendar setting mode, simultaneously press
date and switching Standard Time/Daylight Savings Time can be found in paragraphs 5.2 and 5.3 (it is possible to change single
parameters). From the change Standard Time/Daylight Saving Time parameter, press
13 - CUSTOM SETTING OF SWITCHING STANDARD TIME/DAYLIGHT SAVING TIME
The Ch 5 switching program requires insertion of the dates to change from Standard Time to Daylight Saving Time (+1 hour) and vice-
versa (- 1 hour). After having confirmed program
using the DAY key, enter the day for switching from Standard Time to Daylight Saving Time. With this same procedure, set the date for reset-
ting to Standard Time. In the example: Daylight saving time begins Sunday, March 27; Standard Time begins Sunday, October 9 (ref. year 2011).
Ok
1 2 3 4 5 6 7 1 2 3 4 5 6 7
Y-M-Ch
1
1 2 3 4 5 6 7 1 2 3 4 5 6 7
OK and
1 2 3 4 5 6 7
. Repeatedly press to set minutes or press continuously to change hours. Press

(year, month, day, switching Standard Time/Daylight Savings Time)

and
Ch 5 , simultaneously press
Ok
Y-M-Ch
1
1 2 3 4 5 6 7 1 2 3 4 5 6 7
Day
Ok
1 2 3 4 5 6 7
PROG to enter into "Reading programs" mode; use
Prog Prog
1 2 3 4 5 6 7
during normal operation . The procedure for changing the
1
OK to return to normal operation.
and 1 to set the month and then confirm with
Day
1 2 3 4 5 6 7
in INITIAL OPERATION
conditions, proceed with
Ok
operations as per parag. 5.4.
or the device will return to
normal operation.
1 2 3 4 5 6 7
Ok
1 2 3 4 5 6 7
OK to confirm the
OK. Then,
Note:
When programming
Ok
or modifying Ch 5 :
C1 = switching month and day +1h
OFF switching month and day 1h = -
1 2 3 4 5 6 7 29
EN