Technical Specifications; Functional Characteristics - Perry Electric 7080 Serie Mode D'emploi

1 - TECHNICAL SPECIFICATIONS

Power supply voltage
Frequency
Degree of protection
Type of action, disconnection
and device
Type of output
EN
Cross-section of wires to terminals
Charging reserve during power
Failure
Minimum charging time
Rated impulse voltage
Software
Time allowance
Absorption/Internal consumption
Insulation
Pollution rating
Installation
Operating temperature
Storage temperature
Dimensions (LxDxH)
Standard for marking
Controllable maximum power
Max
switchable
power
3500 VA
2300W
per single
contact
18
230 V c.a. +/- 10%
50-60 Hz
IP20
1 B U S / electronic
1st or 2nd relay with changeover,
single-pole, voltage free contact:
NO/COM/NC 16 (2)A 250V~
²
1...6mm
max 15 days
with NiMH rechargeable battery
72h
4kV
ClassA
+/ 0.5 sec/day at 25 °C
5.7 VA (single channel) / 6.9 VA (dual channel)
Class II
Normal
DIN bar - back panel (with optional KIT)
from 0 °C to +50 °C
from -10 °C to +65 °C
35 x 60 x 90 (2 DIN modules)
LVD/EMC EN60730-2-7
700W
290W 105W
(total capacity 35 µF) (7 x 15W)

1.1 - Functional characteristics

Display LCD 1" 1/3 constantly backlit.
Calendar setting: year, month, day.
Number of programs: 20 (20 on and 20 off) assignable to channel
1 or channel 2 or both.
Minimum ON/OFF programming 1 second.
Programming Time:
from 1 sec to 99 sec
from 1 min to 59 min
from 1h to 24h
from 1 day to 7 days for days and/or block so days (weekly mode)
Programming in seconds, ideal for school bell activation or sirens
for work start and finish.
Programming for interventions straddling midnight using a single
program.
Modifiable permanent memory (EEPROM) for maintaining programs
beyond the charge reserve.
Minute by minute updating of variables and programming.
Channel or channels activation at the end of the minute.
Possibility of temporary or permanent forcing of channel/s.
±1h automatic summer/winter time change for 4 geographic areas
or on programmed days (Ch 5).
Possibility of deleting single programs.
Deleting all entered data.
Reset Operation.
Captive screw terminals.
Hinged and sealable glass.
Possibility of back panel installation with optional accessory kit.
(based on the model)