Entering New Programs In Addition To Those Already Entered; Changing The Current Hour; Changing The Current Day; Manual Forcing Of Channel/S - Perry Electric 1IO6081 Mode D'emploi

10 - ENTERING NEW PROGRAMS IN ADDITION TO THOSE ALREADY ENTERED

Programs which have remained free can then be programmed. Press
PROG to search for a free program, press
then enter the program as indicated in the
PROGRAMMING chapter. Return to "normal
operating status" by pressing PROG.

11 - CHANGING THE CURRENT HOUR

EN
From normal operation, press
Press OK to confirm the new setting and return to normal operation.
12 - CHANGING THE CURRENT DAY (weekly model only)
From normal operation, press
pressing DAY once or several times. Press
13 - MANUAL FORCING OF CHANNEL (relay)
13.1) Temporary manual forcing
It is possible during normal operation to change channel status by briefly pressing key
on the display by the appearance of a symbol
the forced channel was deactivated
once again press key 1
1
1 2 3 4 5 6 7 1 2 3 4 5 6 7
26
OK and
. Repeatedly press to set the minutes or press continuously to set the hours.
DAY . When this is released, the days of the week will flash on the display. Select the new day by
OK to confirm the new setting and return to normal operation.
near the channel symbol and charging status indication
OFF, it will then become
; the channel will return to the status found in normal programming operation.
1
1 2 3 4 5 6 7
PROG to enter into "Reading programs" mode; use
Prog
1 2 3 4 5 6 7 1 2 3 4 5 6 7
1 . Temporary forcing status is highlighted
On and vice-versa). To return to normal programming operations,
Important: channel temporary manual forcing is aban-
doned upon the first switching of the channel itself (variation
from On to OFF and vice-versa) due to the programming
being executed.
Ok
Prog
1 2 3 4 5 6 7
On or OFF (example: if