Reading Programs (From P1 To P20) - Perry Electric 7080 Serie Mode D'emploi

6.4) Entering a program with a duration of several days
In this case, it is necessary to program activation day and time and deactivation day and time. In the example shown, program
P 5 is created with channel 1 and 2 activation at 18:00 on Friday and deactivation at 21:00 on Sunday.
Attention: all other programs will be disabled during the activation period from 18:00 on Friday to 21:00 on Sunday.
2
1
1 2 3 4 5 6 7 1 2 3 4 5 6 7
Day
1 2 3 4 5 6 7
1 2 3 4 5 6 7

7 - READING PROGRAMS (from P1 to P20)

In normal operation, press PROG
gram: program number, channels
PROG is pressed again, the following appear: program number, channels
OFF deactivation time or activation seconds.
To exit from reading mode, press
operating status).
Attention: flashing On and OFF
a duration of several days.
Prog Prog
1 2 3 4 5 6 7 1 2 3 4 5 6 7
Note: in program reading mode only can you modify, delete or reprogram a program, or program
a free program (see next chapter).
Ok
Day
1 2 3 4 5 6 7
Ok
1 2 3 4 5 6 7
to access program reading mode. The display will show the elements characterising the pro-
(Dual channel mod. only) , day or group of days
PROG several times or keep it pressed (for quick scrolling) until the current time appears (normal
indicate a program with operation beyond midnight and/or, for Weekly mod. only, a program with
Prog Prog
1 2 3 4 5 6 7
(for weekly models only)
Ok
1 2 3 4 5 6 7 1 2 3 4 5 6 7
Ok
1 2 3 4 5 6 7 1 2 3 4 5 6 7
(Weekly mod. only)
(Dual channel mod. only)
Prog Prog
Prog
1 2 3 4 5 6 7 1 2 3 4 5 6 7
Ok
1 2 3 4 5 6 7
Note: display of symbols
for the selection of channels 1
and/or C2 takes place only
for the dual channel model
, On activation time. When
, days (Weekly mod. only)
Current time
Prog Prog
1 2 3 4 5 6 7
e.g. Free Exit from Program
program reading status
EN
,
27