MW TOOLS OD68 Mode D'emploi page 10

OD68 - NLFREN - v1.1 - 07092017
TOOLS
EN
To evacuate oil
Evacuate used oil from tank when maximum oil level is obtained. DO NOT overfill tank above maximum
oil level as shown above. Raise drain bowl and lock in place, close valve fully, (valve handle in horizontal
position), and place nozzle SECURELY into used oil collection reservoir. Connect air to inlet nipple and
discharge oil. Never leave unit unattended when evacuating oil. Immediately disconnect air supply when oil
no longer discharging into reservoir.
Spare parts: see page 11
10