Technical Data - MW TOOLS CAT140 Mode D'emploi

Warnings
• Read carefully before operating.
• Do not over fill solvent. Fill to just below level of parts tray
• Do not use any solvent with a flashpoint below 150°F / 65.5°C.
• Only use petroleum or biodegradable based solvents that are approved for electric parts washers.
• Use only in a well ventilated area.
• Do not operate while smoking.
• Do not operate near heat sources such as heaters, sparks, open flame, etc.
• Should fire occur in parts washer, do not attempt to move parts washer, lid is on a fusible link and will fall
automatically to extinguish flame.
• Do not modify or jam lid to keep lid locked in an open position.
• Replace damaged parts immediately.
• Use only on grounded 230 Volt/50 Hz outlet.

Technical data

Overall dimensions:
Maximum solvent capacity:
Flowing rate:
Power:
Net weight:
Spare parts: see pages 5-7
560 x 545 x 630 mm
14 l
1.9 l/min
26 W / 230 V / 50 Hz
24.5 kg
4
CAT140 - NLFREN - v1.1 - 21022017
EN