Description; Technical Specifications; Installation; Equipment Off Loading And Inspection - MW TOOLS LA1201 Mode D'emploi

M1.1.LA1201.NLFREN 14082018
EN

2 Description

The fume extractor is designed to provide high efficiency filtration of fume generated during welding processes.
contaminants are captured at the source through the extraction arm hood, clean air is then recirculated back to the
The fume extractor is designed to provide high efficiency filtration of fume generated during welding processes. Contaminants
are captured at the source through the extraction arm hood, clean air is then recirculated back to the working area. Figure 1
working area. figure 1 illustrates the basic operation and identifies the key components of the system.
illustrates the basic operation and identifies the key components of the system.
When the pressure drop remains consistently, or the generated airflow can no longer suitable capture the weld fume, the filter
When the pressure drop remains consistently above 4 ̋ , or the generated airflow can no longer suitable capture the weld
should be replaced.
fume, the filter should be replaced.
Figure 1 Description

3 Technical specifications

FIGURE 1 General Product Operation
Model
Power supply
Power
Air flow
Sound level
Filter precision
Arm length
Arm diameter
Dimensions (l x w x h)
Protection class

4 Installation

The fume extractor must be securely attached to the wall. It can be configured with multiple accessories to serve various
application requirements. Please refer to the proper section when installing your system.

4.1 Equipment off loading and inspection

Upon receipt of your unit, visually inspect for any shipping damage. A damaged carton indicates that the equipment may have
received rough handling during shipping that may have caused internal damage which could cause your system to not function
properly. Notify your delivery carrier and enter a claim if any damage is found.
It is recommended to leave the unit secured to the shipping skid if the use of a skid loader or fork truck is required to deliver the
unit to the point of delivery or installation. It is not recommended to pick the fume extractor up with a fork truck after it has been
removed from the skid.
LA1201
230 V / 50 Hz
0.75 kW
1200 m³/h
72 dB(A)
0.1 µm
2500 mm
150 mm
660 x 330 x 630 mm
IP54
11