Samsung SCC-B5351P Manuel De L'utilisateur page 7

4. Align the arrows on the COVER-CEILING and the
BRACKET to assemble the two parts and then rotate the
COVER-CEILING approximately 25 degrees to fix them
together.
BRACKET
COVER-CEILING
CASE-BOTTOM
Align the arrows on each side when assembling the pieces
Point
Make sure to hold and rotate the COVER-CEILING and
Caution
not the CASE-BOTTOM, otherwise the COVER-
CEILING may not turn appropriately and the camera will
not be properly assembled.
5. Push the STOPPER-PIN firmly into the COVER-CEILING
HOLE STOPPER-PIN
STOPPER-
PIN
COVER-
CEILING
Use a straight screwdriver to lift and pull out the
Point
STOPPER-PIN when dismantling.
10
User Guide
Caution
The STOPPER-PIN needs to be properly in place to prevent
the camera body from falling off.
6. Adjusting the horizontal alignment of the camera LENS
BLOCK.
- Leave the lens block position as provided when
installing on a ceiling.
ceiling
LENS-
BLOCK
Installing on a ceiling (Default position)
- Completely unscrew the LENS-BLOCK fixing-screw in
the anti-clockwise direction and rotate the LENS-
BLOCK 180° . The text - "BOTTOM" - must face
downwards. Fix the LENS-BLOCK by putting the
removed fixing-screw back into the other side.
Wall
LENS-
Fixing-Screw
BLOCK
Installing onto a wall.
11
User Guide
E