Introduction/Scope Of Supply; Transport And Storage - Format 55790010 Mode D'emploi

Transport and Storage

• Diode- and acoustical Continuity Test
• Temperature Measurement
• Battery Test 1.5 V and 9 V
• Manual Measurement Range Selection
• Impact and shock proof due the standard protective holster
Scope of Supply:
1 pc. Digital Multimeter format 55790010
1 pc. Holster
2 pcs. Test Leads (1 x red, 1 x black)
1 pc. Temperature Probe
1 pc. Battery 9 V, IEC 6LR61
1 pc. Manual
2.0 Transport and Storage
Please keep the original packaging for later transport, e.g. for calibration.
Any transport damage due to faulty packaging will be excluded from warranty
claims.
In order to avoid instrument damage, it is advised to remove accumulators
when not using the instrument over a certain time period. However, should the
instrument be contaminated by leaking battery cells, you are kindly requested
to return it to the factory for cleaning and inspection.
Instruments must be stored in dry and closed areas. In the case of an instru-
ment being transported in extreme temperatures, a recovery time of minimum
2 hours is required prior to instrument operation.
26